Virtual Private Networks (VPNs)
When you define a Connection Profile as using ATMP by selecting ATMP as the datalink encapsulation method, and then select Data Link Options, the ATMP Tunnel Options screen appears.
ATMP Tunnel Options
ATMP Partner IP Address: | 173.167.8.134 |
Tunnel Via Gateway: | 0.0.0.0 |
Network Name: | sam.net |
Password: | **** |
Data Encryption... | DES |
Key String: |
|
Initiate Connections: | Yes |
On Demand: | Yes |
Idle Timeout (seconds): | 300 |
Note: An ATMP tunnel cannot be assigned a dynamic IP address by the remote server, as in a PPP connection. When you define an ATMP tunnel profile, the Local WAN IP Address, assigned in the IP Profile Parameters screen, must be the true IP address, not 0.0.0.0, if NAT is enabled.
•ATMP Partner IP Address specifies the address of the other end of the tunnel. When unspecified, the Router can not initiate tunnels (i.e., act as a foreign agent) for this profile; it can only accept tunnel requests as a home agent.
•When you specify the ATMP Partner IP Address, and the address is in the same subnet as the Remote IP Address you specified in the IP Profile Parameters, you can specify the route (Tunnel Via Gateway) by which the Router partner is reached. If you do not specify the ATMP Partner IP Address, the Router will use the default gateway to reach the partner and the Tunnel Via Gateway field is hidden. If the partner should be reached via an alternate port (i.e., the LAN instead of the WAN), the Tunnel Via Gateway field allows this path to be resolved.
•You can specify a Network Name. When the tunnel partner is another Motorola Netopia® Router, this name may be used to match against a Connection Profile. When the partner is an Ascend gateway in Gateway mode, then Network Name is used by the Ascend gateway to match a gateway profile. When the partner is an Ascend gateway in Gateway mode, leave this field blank.
•You must specify a Password, used for authenticating the tunnel.
Note: The Password entry will be the same for both ends of the tunnel.
•For
Note: Ascend does not support DES encryption for ATMP tunnels.
•You must specify a Key String of up to (and including) 20 characters when DES is selected. When encryption is None, this field is invisible.
