Motorola 6161252-00-01 manual GET Config from Server, Send Config to Server, Tftp

10-48 Administrator’s Handbook

Once you make the selection, if you factory Default the Router, it will reboot with the saved configuration you have selected.

Configuration Management

Save Current Configuration as...

Replace Existing Configuration...

Boot from a Configuration...

Delete a Configuration...

Factory Default from Configuration:	HappyInternet
Remove Factory Default Configuration

Return/Enter to select Factory Default Configuration.

To remove the saved configuration from being the Factory Default, select Remove Factory Default Configuration and press Return. This will remove the configuration from being used as the Factory Default.

It does not, however, delete the configuration, so you can still re-use it at any time.

TFTP

You can also send or receive your stored configuration files via TFTP. You select the stored configuration files from pop-up menus in the TFTP File Transfer screen in the Utilities & Diagnostics menu, as shown.

Trivial File Transfer Protocol (TFTP)
TFTP Server Name:
Firmware File Name:
GET ROUTER FIRMWARE FROM SERVER...
Config File Name:	+-----------------------	+
	+-----------------------	+
Get Configuration Destination...	Current Configuration
GET CONFIG FROM SERVER...	Backup Config
	HappyInternet
Send Configuration...	<Empty> Type Name

SEND	CONFIG TO SERVER...		+-----------------------+
TFTP	Transfer State --	Idle
TFTP	Current Transfer Bytes --		0
Up/Down Arrow	Keys to select, ESC to dismiss, Return/Enter to Edit.