WAN Configuration 2-15
You can also delete Connection Profiles by selecting them in the same manner using the Delete Connection Profile option in the WAN Configuration screen.
Advanced Connection Options
Depending on your model, the Advanced Connection Options screen offers a variety of powerful options for advanced users. Screens shown in this section may vary from what your particular model displays.
Configuration Changes Reset WAN Connection
The menu supports delaying some configuration changes until after the Motorola Netopia® Router is restarted.
If your Motorola Netopia® Router is preconfigured by your service provider, or if you are not remotely configuring the router, you can leave this setting unchanged.
The purpose of this feature is to defer configuration changes only when remotely configuring or reconfiguring the Motorola Netopia® Router to prevent premature Telnet disconnection. When this feature is enabled, no changes to the WAN setup, datalink encapsulation, Connection Profiles, or Default Gateway will take effect until after the Motorola Netopia® Router is restarted. Until the Motorola Netopia® Router is restarted the WAN link and the routing table remain unaffected.
A single setting in the Advanced Connection Options screen controls this feature, as shown below.
Advanced Connection Options
Configuration Changes Reset WAN Connection: | Yes |
Scheduled Connections...
Backup Configuration...
Prioritize
Diffserv Options...
VRRP Options...
Return/Enter to configure SA Backup Parameters.
When you toggle Configuration Changes Reset WAN Connection either to Yes or No using the Tab key and press Return, a
