3-58 Administrator’s Handbook
The following syslog messages may be generated by the router if WAN Event Log Options are enabled:
1.Device Restarted
2.EN: IP up, WAN 1, gateway: <IP Address> local: <IP Address>
3.Received NTP Date and Time [mon][dd][hh][mm][ss][year]
4.NTP configuration has been changed
5.System Date/Time configuration changed
6.PPP: IPCP negotiated, session [sessionID], rem: [IP Address] local: [IP Address]
7.
8.PPP: Channel [channelID] up [reason] Profile name: [name]
9.PPP: NCP up, session [sessionID] Channel [channelID] Final (fallback) negotiated auth: Local [IP Address], Remote [IP Address]
10.PPP: MP negotiated, session [sessionID] Remote EDO: [value]
11.PPP: CCP negotiated, session [sessionID], type: [type] Local mode: [mode], Remote mode: [mode]
12.* PPP:[sessionID] authentication failed, Channel [channelID] Reason: [reason]
13.PPP: [authentication type] remote accepted us, Channel [ChannelID] Remote name: [name]
14.PPP: [authentication type] we accepted remote, Channel [ChannelID] Remote name: [name]
15.PPP: NCP up (more) Remote (auth) name: [name]
16.* PPP: Remote auth name not found: [name]
17.PPP: BACP negotiated, session [sessionID] Local MN: [local], Remote MN: [remote]
18.PPP: IPCP down, session [sessionID]
19.PPP down:[reason]
20.IP: Demand call requested by [IP Address] to IP destination [IP Address]
21.PPP: Timeout, session [sessionID]
22.>>WAN: [ID} activated at [rate] Kbps
23.>>WAN: [ID] deactivated
24.* WAN: data link inactive, no valid profile
25.
26.
27.
28.
29.PPPOE:[ID] profile [Profile Name]
30.PPPOE: PADI Sent
31.PPPOE: PADO Received
32.PPPOE: PADR Sent