Motorola 6161252-00-01, Enterprise Series Routers manual Editing or Deleting ALANs

7-40 Administrator’s Handbook

•Ethernet IP Address – The IP address of the additional LAN.

•Ethernet Subnet Mask – The IP subnet mask address of the additional LAN.

•Define Additional Subnets – Additional subnets for multi-homing (same as the primary interface). See “IP Address Pools” on page 7-19.

•IP Address Serving – Same as the global link to address serving. See “IP Address Serving” on page 7-17.

•RIP Options – Same as the primary interface. See “RIP Options” on page 7-9.

•VRRP Options – Same as the primary interface. Two Virtual routers can be added to each of the ALANs. See “Virtual Router Redundancy (VRRP)” on page 7-34.

•Multicast Forwarding – Same as the primary interface. See “Multicast Forwarding” on page 7-32.

•Filter Set – Attaches a defined filter set to the LAN. See “About Filters and Filter Sets” on page 10-20. When you are finished, select COMMIT and press Return. Your ALAN is configured.

Note: ALAN creation or deletion takes effect only upon reboot. See “Restarting the System” on page 11-8, if you don’t know how to do this.

Editing or Deleting ALANs

You can manage or edit your ALANs at any time. To modify or delete a configured ALAN, return to the IP Setup screen and select Additional LANs.

The Additional LAN Configuration screen appears.

Additional LAN Configuration

Show/Change ALAN...

Add ALAN...

Delete ALAN...

If you select either Show/Change ALAN or Delete ALAN, a pop-up window allows you to choose the ALAN you want to modify or delete.