Motorola 6161252-00-01 manual General status, Current status, ATM Adsl WAN, Usb Lan, Isp

9-2 Administrator’s Handbook

General status

					Quick View			10/11/2006 07:31:26 AM
Default IP Gateway:			0.0.0.0
Primary DNS Server:			0.0.0.0			Gateway installed --			Backup
Secondary DNS Server: 0.0.0.0						Domain Name: netopia.com
----------------		MAC Address--------				IP Address-------	Status--------------------
Ethernet LAN:		00-00-c5-ff-70-00				192.168.1.1	100Mbps Full Duplex
ATM ADSL WAN:		00-00-c5-ff-70-02				0.0.0.0
USB LAN:		00-00-c5-9a-09-a9				192.168.1.1	Down
				Current WAN Connection Status
Profile Name----------			Rate--	%Use-Remote Address-----			Est.-More Info------------
ISP			1536	10	IP 92.163.4.1		Lcl	NAT 192.163.100.6
VPN QuickView					LED Status
-PWR---	USB---DSL Link Activity--				ETHERNET Activity Link--			+--------	LEDS---------
								'-'= Off 'G'= Green
G	-	-	-			G	G	'R'= Red 'Y'= Yellow

Current Date: The current date; this can be set with the Date and Time utility (see “Date and time” on page 3-37).

Default IP Gateway: The gateway’s default gateway, which may be either manually configured or learned via DHCP. This is the value you assigned in the Default IP Gateway field. If you are using the gateway’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your default gateway, it is shown here.

Primary DNS Server: If you are using the gateway’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your primary default gateway, it is shown here.

Secondary DNS Server: If you are using the gateway’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as a secondary gateway, it is shown here.

Domain Name: The domain name you have assigned, typically the name of your ISP.

MAC Address: The Router’s hardware address, for those interfaces that support DHCP.

IP Address: The Router’s IP address, entered in the IP Setup screen.

Current status

The current status section is a table showing the current status of the DSL connection. For example:

	Current WAN Connection Status
Profile Name----------	Rate--	%Use-Remote Address-----	Est.-More Info------------
ISP	1536	10 IP 92.163.4.1	Lcl NAT 192.163.100.6

Profile Name: Lists the name of the connection profile being used, if any.