Virtual Private Networks (VPNs)
In the Display/Change IP Filter Set screen select Display/Change Output Filter.
Display/Change Output Filter screen
Source IP | Dest IP | |||||
|
|
|
| + | ||
1 | 0.0.0.0 | 0.0.0.0 | TCP | NC | =1723 | Yes Yes |
2 | 0.0.0.0 | 0.0.0.0 | GRE | Yes Yes | ||
|
|
|
|
| ||
|
|
|
| + | ||
Select Output Filter 1 and press Return. In the Change Output Filter 1 screen, set the Protocol Type and Destination Port information as shown below.
Change Output Filter 1
Enabled: | Yes |
Forward: | Yes |
Call Placement/Idle Reset: | No Change |
Force Routing: | No |
Source IP Address: | 0.0.0.0 |
Source IP Address Mask: | 0.0.0.0 |
Dest. IP Address: | 0.0.0.0 |
Dest. IP Address Mask: | 0.0.0.0 |
TOS: | 0 |
TOS Mask: | 0 |
Protocol Type: | UDP |
Source Port Compare... | No Compare |
Source Port ID: | 0 |
Dest. Port Compare... | No Compare |
Dest. Port ID: | 5150 |
Return/Enter accepts * Tab toggles * ESC cancels.
Enter the packet specific information for this filter.
