3-8 Administrator’s Handbook
IP Profile Parameters
Address Translation Enabled: | Yes |
IP Addressing... | Numbered |
NAT Map List... | |
NAT Server List... | |
NAT Options... |
|
Stateful Inspection Enabled: | No |
Local WAN IP Address: | 0.0.0.0 |
Local WAN IP Mask: | 0.0.0.0 |
Filter Set... |
|
Remove Filter Set |
|
RIP Profile Options... |
|
Return/Enter to select <among/between> ... |
|
Configure IP requirements for a remote network connection here. |
When you create or modify a Connection Profile, the IP Profile Parameters screen allows you to enable Stateful Inspection on that profile by toggling Stateful Inspection Enabled to Yes. By default, this is turned off (No). If you enable Stateful Inspection, the Stateful Inspection Options field appears.
Stateful Inspection Options
IP Profile Parameters
Address Translation Enabled: | No |
IP Addressing... | Numbered |
Stateful Inspection Enabled: | Yes |
Stateful Inspection Options... |
|
Local WAN IP Address: | 0.0.0.0 |
Local WAN IP Mask: | 0.0.0.0 |
Filter Set... |
|
Remove Filter Set |
|
RIP Profile Options...
Configure IP requirements for a remote network connection here.
Select Stateful Inspection Options and press Return. The Stateful Inspection Parameters screen appears.