![](/images/new-backgrounds/1213653/213653259x1.webp)
4-22 Administrator’s Handbook
IP Profile Parameters
Address Translation Enabled: | Yes |
IP Addressing... | Numbered |
NAT Map List... | |
NAT Server List... | |
NAT Options... |
|
Stateful Inspection Enabled: | No |
Local WAN IP Address: | 0.0.0.0 |
Local WAN IP Mask: | 0.0.0.0 |
Remote IP Address: | 127.0.0.2 |
Remote IP Mask: | 255.255.255.255 |
Filter Set... |
|
Remove Filter Set |
|
RIP Profile Options...
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
•Select NAT Map List and press Return. A
IP Profile Parameters
+ | |
Address | +s |
IP Addressing | mbered |
NAT Map List. my_map | |
NAT Server Li <<None>> | |
NAT Options.. | |
Stateful Insp | |
Local WAN IP | 0.0.0 |
Local WAN IP | 0.0.0 |
Remote IP Add | 7.0.0.2 |
Remote IP Mas | 5.255.255.255 |
Filter Set... | |
Remove Filter | |
RIP Profile | + |
Up/Down Arrows to select, then Return/Enter; | ESC to cancel. |
•Select the map list you want to bind to this Connection Profile and press Return. The map list you selected will now be bound to this Connection Profile.
•Select NAT Server List and press Return. A