Motorola Enterprise Series Routers, 6161252-00-01 manual Line Backup, Configuring Backup

Line Backup 8-1

Chapter 8

Line Backup

Motorola Netopia® Embedded Software Version 8.7.4 offers line backup functionality in the event of a line failure on the primary WAN link:

•to an internal V.92 modem (supported models) or

•to a backup default gateway.

This chapter covers the following topics:

•“Configuring Backup” on page 8-1

•“Connection Profiles” on page 8-2

•“WAN Configuration” on page 8-7

•“Using Scheduled Connections with Backup” on page 8-12

•“Backup Default Gateway” on page 8-14

•“Backup Management/Statistics” on page 8-16

•“QuickView” on page 8-18

The purpose of line backup is to provide a recovery mechanism in the event that the primary connection fails. A failure can be either line loss, for example by central site switch failure or physical cable breakage, or loss of end-to-end connectivity. Detection of one of these failures causes the router to switch from using the primary DSL WAN connection to using a built-in V.92 modem. Alternatively, you can choose backup to an alternate gateway on the Ethernet LAN. In the event of a loss of primary connectivity you have the option of switching back to the primary port automatically once it has recovered its connection.

Configuring Backup

The following menus support backup configuration:

•the Add Connection Profile menus under the WAN Configuration menus

Here you choose Encapsulation Type = PPP, fill out the correct IP Profile Parameters information, select

Backup as the Interface Group, and fill out the Telco Options. See “Connection Profiles” on page 8-2.

•the MODEM (Wan Module 2) Setup menu under the WAN Configuration, WAN (Wide Area Network) Setup menus

Here you configure the Internal Modem Setup that governs a number of general behavior settings for the internal V.92 modem. See “WAN Configuration” on page 8-7.

•the Backup Configuration menu under WAN Configuration, Advanced Connection Options