2-10 Administrator’s Handbook
•If you selected PPP or RFC1483, the screen offers different options:
| Add Connection | Profile |
Profile Name: |
| Profile 1 |
Profile Enabled: |
| Yes |
Encapsulation Type | ...+--------------+ | |
| + | |
RFC1483 Mode... | Bridged 1483 | |
| Routed 1483 | |
| + |
| Add Connection | Profile |
Profile Name: |
| Profile 1 |
Profile Enabled: | Yes | |
Encapsulation | Type... | PPP |
Underlying Encapsulation... | None | |
PPP Mode... |
| VC Multiplexed |
Encapsulation | Options... |
|
IP Profile Parameters...
IP Profile Parameters...
Interface Group... | Primary |
COMMIT | CANCEL |
COMMIT | CANCEL |
Configure a new Conn. Profile. Finished? COMMIT or CANCEL to exit.
•If you selected RFC1483, the screen allows you to choose Bridged 1483 or Routed 1483.
•If you selected PPP, the screen allows you to choose PPPoE or None as the Underlying Encapsulation.
•If you choose None, the PPP Mode offers the choice of VC Multiplexed or LLC SNAP.
If you are using PPP, when you select Encapsulation Options, the Datalink (PPP/MP) Options screen appears. (RFC1483 does not require these options and does not offer the menu selection.)