Multi-NAT 4-23
Select the server list you want to bind to this Connection Profile and press Return. The server list you
selected will now be bound to this Connection Profile.
Note: There is no interdependency between NAT and IP Addressing. Also, the Local WAN IP Address and Mask
fields’ visibility are dependent only on the IP Addressing type.
IP Parameters (WAN Default Profile)
The Motorola Netopia® Embedded Software Version 8.7.4 using RFC 1483 supports a WAN default profile that
permits several parameters to be configured without an explicitly configured Connection Profile.
The procedure is similar to the procedure to bind map lists and server lists to a Connection Profile.
From the Main Menu go to the WAN Configuration screen, then the Default Profile screen. Select IP Parameters
and press Return.
The IP Parameters (Default Profile) screen appears.
IP Profile Parameters
+-NAT Server List Name-+
Address Trans+----------------------+s
IP Addressing| Easy-Servers |mbered
NAT Map List.| my_servers |sy-PAT List
NAT Server Li| <<None>> |sy-Servers
NAT Options..| |
Stateful Insp| |
| |
Local WAN IP | |0.0.0
Local WAN IP | |0.0.0
Remote IP Add| |7.0.0.2
Remote IP Mas| |5.255.255.255
Filter Set...| |
Remove Filter| |
| |
| |
| |
| |
RIP Profile O+----------------------+
Up/Down Arrows to select, then Return/Enter; ESC to cancel.
Main
Menu
WAN
Configuration

IP Parameters

WAN Default
Profile