Motorola 6161252-00-01, Enterprise Series Routers manual WAN Event History Error Reporting, Atmp

6-24 Administrator’s Handbook

VPN Quick View

Profile Name----------	Type--	Rx Pckts--	Tx Pckts--	Discard--Remote Address--
HA <-> FA1 (Jony Fon	ATMP	99	99	173.166.82.8
HA <-> FA3 (Sleve M.	ATMP	13	14	63.193.117.91
My IPsec Tunnel	IPsec	23	12	0.0.0.0
Bangalore	PPTP	45	35	1.1.1.1

If the remote tunnel end point is a hostname (or “0.0.0.0”) 0.0.0.0 is displayed until a Security Association is established. Previously the remote members network was displayed.

WAN Event History Error Reporting

The following events are logged and displayed in the WAN Event History screen:

Event message:	Meaning:
IKE: no ph1 preferences assigned	An attempt was made to use an IPsec profile with no IKE
	profile attached to it.
IKE: DNS lookup failure	The DNS lookup of the remote tunnel end point has failed.
IKE: no matching ph1 profile	An IKE phase 1 request was received and did not match
	any of the profiles stored in the local Router.
IKE: no matching proposal	An IKE phase 1 request was received and the proposal did
	not match an allowed parameter, or else the remote
	rejected the local Router’s proposal.
IKE: phase 1 auth failure	The phase 1 remote authentication failed.
IKE: phase 1 resend timeout	The attempt to resend the phase 1 remote authentication
	timed out.
IKE: phase 1 complete	The phase 1 negotiation completed successfully.
IKE: phase 2 hash failure	The phase-2 hash failed because the data received is out
	of date or has been tampered with.