System Configuration
You can edit or delete exposed address lists by selecting Show/Change Exposed Address List or Delete Exposed Address List. A list of previously configured exposed addresses appears. This allows you to select an exposed address list for editing or deletion.
|
| Add Exposed Address List |
| |
Exposed Address | + | |||
|
| + | ||
192.168.1.10 | 192.168.1.12 | TCP and UDP | ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
|
| ||
|
| + |
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
Note: Add, Edit, or Delete exposed addresses options are active only if NAT is disabled on a WAN interface. The hosts specified in exposed addresses will be allowed to receive inbound traffic even if there is no corresponding outbound traffic.
Exposed Address Associations
Enable and configure stateful inspection on a WAN interface.