3-62 Administrator’s Handbook
g. Escape once back to the Add Connection Profile screen. h. Press Enter on COMMIT to save this profile
10.Select Display/Change Connection Profile... and press Enter on the VPN profile you have just created.
11.Set Profile Enabled: to Yes
12.Select IP Profile Parameters...
a.Set Address Translation to No
b.If Stateful Inspection Enabled is set to Yes, make sure that Enable default mapping to router under Stateful Inspection Options... is enabled.
c.Set Remote IP Address: to a static private IP address on this Router’s network that is available and not being served via DHCP
d.Set Remote IP Mask: to 255.255.255.255. Alternatively, you can leave the Remote IP Address: and Remote IP Mask: at 0.0.0.0, and your router can assign an IP address to the PPTP client.
e.Do not enable a filter set in the VPN profile. Ignore Rip Profile Options…
f.Escape to the Main Menu and go to Utilities and Diagnostics...
g.Select Restart System... and CONTINUE
The router is now configured for incoming PPTP from a remote
Set up NTP
(See “Date and time” on page
1.NTP is enabled by default.
2.To change NTP Settings, Go to System Configuration and select Date and Time…
3.Set Date and Time parameters, if desired
a.NTP Enabled can be set to On/Off
b.Time Server 1 Host Name/IP Address and Time Server 2 Host Name/IP Address points to the primary and secondary Time Servers respectively.
c.Time Zone… can be changed (defaults to Pacific Standard Time)
d.NTP Update Interval can be changed (defaults to one hour)
e.System Date Format can be changed (defaults to MM/DD/YY)
f.System Time Format can be changed (defaults to AM/PM)
g.Escape to the Main Menu and go to Utilities and Diagnostics...
h.Select Restart System... and CONTINUE
Set up Syslog
(See “Logging” on page
1.Go to System Configuration and select Logging…
2.Under Syslog Parameters,
