Voice Mail Administration
Voice mail is enabled when the switch sends a guest’s call to a coverage path. The following procedure, however, provides a separate number that can be used at any time to send voice mail to a guest.
To provide this service:
1.Administer on your switch a phantom number. This number is used to send voice messages to your subscribers.
2.Configure the phantom number so that the Intuity system hunt group covers all calls.
3.Assign to the new extension, the service: “ldg_ni_ca” as follows:
a.Log on to the Intuity system as sa or craft.
b.From the Intuity Administration menu select the following sequence:.
>Voice System Administration
Voice Equipment
c. From the Voice Equipment screen, press
ASSIGN (F3).
d.Select Services to Called Numbers from the Assign menu.
e.Press CHOICES (F2) and select ldg_ni_ca
f.Enter the called number of your choice.
g.Press SAVE (F3). A
h.Press CANCEL (F6) three times to exit to the Voice Equipment screen.
4.If the phantom extension will be accessed from outside your system, assign the extension to a
5.Provide the Lodging voice mail number to subscribers for the Lodging application.
