3.Select Group Calling.
■On the console: Select Grp Calling.
■On the PC: Press F4 .
The Group Calling menu appears.
4.Select Line/Pool.
■On the console: Select Line/Pool.
■On the PC: Press F10 .
The Group Calling screen appears.
5.Enter the extension of the calling group (typically, 770).
6.Save your entry.
■On the console: Select Enter.
■On the PC: Press F10 .
7.Enter the Line/Trunk number or pool number you want to assign.
NOTE:
If 801, 802, 803, etc. are in pool 70, then you must specify 70.
8.Save your entry.
■On the console: Select Enter.
■On the PC: Press F10 .
9.Repeat Steps 7 and 8 as required for additional lines/pools.
10.Return to the System Programming menu.
■On the console: Select Exit three times.
■On the PC: Press F5 three times.
Hunt Type
Use this procedure to assign the
To set the
1.From the System Programming menu, select the Extensions menu.
■On the console: Select Extensions.
■On the PC: Press F6 .
The Extensions menu appears.
