Glossary
common control switch processor over a direct memory access (DMA) channel that reads data directly from FP memory.
data link
A term used to describe the communications link used for data transmission from a source to a destination. For example, a phone line for data transmission.
data service unit (DSU)
A device used to access digital data channels. DATAPHONE II 2500 DSUs are synchronous data communications equipment (DCE) devices used for
data set
AT&T term for a modem. A data set usually includes the telephone. See also modem.
data terminal equipment (DTE)
Standard type of data interface normally used for the endpoints in a connection. Normally the AT&T Intuity system, most terminals, and the switch data link are DTE devices.
data terminal ready (DTR)
A control signal sent from the data terminal equipment (DTE) to the data communications equipment (DCE) that indicates the DTE is on and ready to communicate.
DBP
See data base processor.
DCE
See data communications equipment.
DCIU
See data communications interface unit.
DCP
See digital communications protocol.
DCS
See distributed communications system.
debug
See troubleshoot.
dedicated line
A communications path that does not go through a switch. A dedicated
default
A value that is automatically supplied by the system if no other value is specified.
default print number
The
delivered message
A message that has been successfully transmitted to a recipient's incoming mailbox.
demand testing
Testing performed on request (usually by service personnel).
Issue 2.0 December 1995