Figure 4-9. Connecting SMDR Ports More Than

50 Feet/Different Power Outlet

14.Connect to the Intuity System:

To connect to S erial Port 2 on the MAP/5 or COM2 on the MAP/40 or MAP/100, connect the 9-pin end of the 9-pin-to-25-pin adapter to Serial Port 2 on the Intuity system. Then connect one end of an M8AJ-87 cable to the 25-pin end of the 9-pin-to-25-pin adapter.

To connect to the f irst available port on the Multi-Port Serial Card, connect one end of the 6-position, 6-conductor modular cord to the port. Connect the other end of the modular cord to the DTE 4/6-to- DB-25P Adapter. Then connect one end of an M8AJ-87 cable to the other end of the DTE 4/6-to-DB-25P adapter

15.Connect the other end of the M8AJ-87 cable to the Z3A2 ADU.

16.Connect one end of a D8W-87 modular cord to the modular jack marked WALL on a Z3A2 ADU.

17.Connect the other end of the D8W-87 modular cord to a 400B2 adapter.

18.Plug the 400B2 adapter into the wall jack from the Communications System site.

Issue 2.0 December 1995 4-17

Page 79
Image 79
AT&T 585-310-231 manual Issue 2.0 December 1995