AT&T 585-310-231 manual Connecting Admin Ports More Than Feet/Different Power Outlet

Go to the Intuity system site to continue the connection. Refer to Figure 4-5.

Figure 4-5. Connecting Admin Ports More Than

50 Feet/Different Power Outlet

14.Connect to the Intuity system:

—For the MAP/5, connect one end of a M8AJ-87 cable directly to Serial Port 1 (tty00) of the MAP/5.

—For the MAP/40 and MAP /100, connect one end of a M8AJ-87 cable to the 25-pin end of the DB-9S to DB-25P adapter, and then connect the 9-pin end of that adapter to port COM1 (tty00) of the MAP/40 or MAP/100.

15.Connect the other end of the M8AJ-87 cable to the Z3A2 ADU.

16.Connect one end of a D8W-87 modular cord to the modular jack marked WALL on the Z3A2 ADU.

17.Connect the other end of the D8W-87 modular cord to a 400B2 adapter.

18.Plug the 400B2 adapter into the wall jack from the Communications System site.

19.Connect one end of a D6AP-87 cord to the 400B2 adapter.

4-10Issue 2.0 December 1995