AT&T 585-310-231 manual Connect IVC6 Boards Using 104A Connecting Blocks

USOC

RJ25C

	D6AM-87
1 2 3		Lines	Line 1	Line 2	Line 3
		1-2-3
	D6AM-87		EXT: EXT:		EXT:
4 5 6		IVP6#		885A Adapter
		Lines	Line 4	Line 5	Line 6
		4-5-6	EXT:	EXT:	EXT:
			D2R-29	D2R-29	D2R-29	D2R-29	D2R-29	D2R-29
			RJ11C	RJ11C RJ11C		RJ11C	RJ11C RJ11C
			Line 4	Line 5	Line 6	Line 1	Line 2	Line 3

Figure 4-1. Connecting IVC6 Boards Using 885A Adapter

Connect IVC6 Boards

Using 104A Connecting Blocks:

Connect IVC6 boards using type 104A connecting blocks as follows:

1.Make sure that the line pairs were run together to type 104A connecting blocks or equivalent. (See Figure 4-2.)

2.Use the supplied D6AM 6-conductor modular cables between the IVC6 board and the type 104A connecting block.

NOTE:

This is one of many ways to connect IVC6 boards to the MERLIN LEGEND system using inside building wire. It is subject to the same distance limitations as stations. The key element is the connection of the T/R circuits to the correct pins on the connecting block jacks.

4-4Issue 2.0 December 1995