4.Select Members.
■On the console: Select Members.
■On the PC: Press F9 .
5.Enter the extension number of the calling group. (Generally, use 770, unless it has been renumbered.)
6.Save your entry.
■On the console: Select Enter.
■On the PC: Press F10 .
7.Enter the extension number of the port you want to assign.
8.Save your entry.
■On the console: Select Enter.
■On the PC: Press F10 .
9.Repeat Steps 7 and 8 for each extension.
10.Return to the System Programming menu.
■On the console: Select Exit three times.
■On the PC: Press F5 three times.
Group Calling Trunk or Pool
Assignments
Use this procedure to assign or remove trunks or pools that ring directly into a calling group.
Incoming calls on each trunk or pool can be directed to only one calling group.
To reassign a trunk or pool to a new calling group, you must remove it from its old group before making the new assignment.
To assign trunks or pools to ring directly into a calling group:
1.From the System Programming menu, select Extensions.
■On the console: Select Extensions.
■On the PC: Press F6 .
The Extensions menu appears.
2.Access the second screen of the Extensions menu.
■On the console: Press More.
■On the PC: Press PgUp .
