3Com SuperStack II manual Changing, Default Console, Port Baud Rate, Adding User, Accounts

60CHAPTER 5: LOGGING ON AND PERFORMING ADMINISTRATIVE TASKS

Changing the	To attach a terminal with a baud rate other than 9600, follow
Default Console	these steps:
Port Baud Rate
1	At the Network Manager prompt (Enterprise OS #), enter:
	SysconF
	The System Configuration menu is displayed.
2	Select the Console Port option.
	A submenu displays the console port baud rate options.
3	Select the baud rate you want to use.
4	Set the terminal baud rate to match the baud rate configured for the
	console port.

CAUTION: Do not reset the bridge/router before changing the terminal baud rate. After the bridge/router resets, the new baud rate is used and you will not be able to access the system software to enter any commands at the default 9600 baud rate.

5After you change the terminal baud rate, reset the bridge/router.

The new console port baud rate does not become effective until you have reset the bridge/router.

Adding User	You can add user accounts with either Network Manager or User
Accounts	privilege. Some commands are available only to root.
	To add a user account, log on as root and use:
	AddUser [<username>]
	If you do not specify a username, you will be prompted for one. Specify
	the privilege and password at the prompts.
	Delete an account using:
	DELeteUser [<username>]
	To force a user password to expire, use:
	EXPire [<username>]
	Any user can change their password by entering:

PassWord