3Com SuperStack II, NETBuilder SI manual Port !5 path

94CHAPTER 7: ADVANCED CONFIGURATION OF PORTS AND PATHS

Scenario 1: Multiple A nonmeshed topology consists of bridge/routers that are not connected Destinations, directly to every other bridge/router, like in a Boundary Routing topology.

Nonmeshed To achieve connectivity between all bridge/routers, create virtual ports for each remote site on the central site so traffic can pass from one remote site to another over the same parent port.

One serial port connects to multiple destinations in a nonmeshed topology.

!6 (port) !5 (path)

CSU/DSU

Start here

Create a virtual port for each destination using the DLCIs:

ADD !V1 -PORT VirtualPort 5@90

ADD !V2 -PORT VirtualPort 5@100

Syntax: ADD !<port> -PORT VirtualPort <path><DLCI>

Done

@90

!V2

!V1

Frame

Relay

@100

CSU/DSUCSU/DSU

Boundary routers