3Com NETBuilder SI, SuperStack II manual Scenario 1 Using Each B Channel Separately, Start here

81

Scenario 1: Using Each B Channel Separately

If you need to connect to two separate locations at 64 Kbps, use each B channel separately. Each B channel can connect to only one location, though both locations can be separate ports on the same bridge/router.

Each B channel connects separately to one destination.

Start here

Create the dial number list for ports 3 and 4:

ADD !3 -PORT DialNoList "1-408-555-1000" Baud = 64 Type = Bri

ADD !4 -PORT DialNoList "1-510-555-1234" Baud = 64 Type = Bri

Syntax: ADD !<port> -PORT DialNoList "<phone no>"

[Baud = <rate> (1.2–16000)] [Type = Modem Bri Sw56] [Pos = <number>]

Done

!3

!4

!3.2 (path)

!3.1 (path) B2: 64 K

B1: 64 K

1-510-555-1234

1-408-555-1000