3Com NETBuilder SI, SuperStack II manual See to configure bridging, IP routing, and IPX routing. To

Where To Go From Here 99

Scenario 2: Fully A fully meshed topology consists of bridge/routers that are connected Meshed Topology directly to every other bridge/router.

Obtain an X.25 address from the X.25 service provider for the serial port.

!6 (port)

!5 (path) 311041501111

311041502222

Modem

X.25

311041504444

Modem

Modem

311041503333

Modem

One serial port connects to multiple destinations in a fully meshed topology.

Start here

Enable X.25 on port 6:

SETDefault !6 -PORT OWNer = X.25

Syntax: SETDefault !<port> -PORT OWNer = X.25

Set the X.25 address for port 6:

SETDefault !6 -X25 X25Address = 311041501111

Syntax: SETDefault !<port> -X25 X25Address = <0-99999999999999> (1-15 digits)

If you are attached to a public data network (PDN), specify the type:

SETDefault !6 -X25 PDNetworkType = TELENET TYMNET PSS DDN BFE

NET2 DATEX TRANSPAC LAPOSTE

Syntax: SETDefault !<port> -X25 PDNetworkType = TELENET TYMNET PSS

DDN BFE NET2 DATEX TRANSPAC LAPOSTE

	Done
Where To Go From	See Chapter 8 to configure bridging, IP routing, and IPX routing. To
Here	configure other protocols, see Using Enterprise OS Software.