3Com NETBuilder SI, SuperStack II manual Using Statistics on, 56/64 Kbps, CSU/DSU Port, 45x

Using Statistics on the 56/64 Kbps CSU/DSU Port (45x and 55x) 115

Using Statistics on	The 56/64 Kbps CSU/DSU port reports 24 hour statistics in 15 minute
the 56/64 Kbps	samples. These statistics are cumulative from the last reboot or the last
CSU/DSU Port	time these statistics were flushed, whichever is later.
(45x and 55x)	To view the statistics for the CSU/DSU path, enter:
	SHow !3 -PATH WanCounters
	The display looks similar to the following example:
	CUMULATIVE STATISTICS SINCE LAST FLUSHED OR REBOOTED+
	SevErrSecs	0019K
	ErrSecs	00020K
	ErrFreeSecs	00245M
	AvailSecs	00245M
	CodeViolate	00168K
	LossofSig	00000
	OutofFrame	00414K
	RemoteLback	00000

LAST 24 HOURS STATISTICS IN 15 MINUTE SAMPLES

00:15 00:30 00:45 01:00 01:15 01:30 01:45 02:00 02:00 SevErrSecs 00000 00000 00000 00000 00000 00000 00000 00000 00000

ErrSecs 00000 00000 00000 00000 00000 00000 00000 00000 00000 ErrFreeSecs 00000 00000 00000 00000 00000 00000 00000 00000 00000 AvailSecs 00000 00000 00000 00000 00000 00000 00000 00000 00000 CodeViolate 00000 00000 00000 00000 00000 00000 00000 00000 00000 LossofSig 00000 00000 00000 00000 00000 00000 00000 00000 00000 OutofFrame 00000 00000 00000 00000 00000 00000 00000 00000 00000 RemoteLback 00000 00000 00000 00000 00000 00000 00000 00000 00000

The error definitions are:

SevErrSecs: The number of seconds of severe errors.

ErrSecs: The number of seconds with errors.

ErrFreeSecs: The number of error-free seconds.

AvailSecs: The number of seconds available for normal operation.

CodeViolate: The number of code violations.

LossofSig: The number of “No pulses received at the network interface”.

OutofFrame: The number of “No framing pattern sync at the network interface”.

RemoteLBack: The number of loopbacks initiated by a remote site.

To flush the statistics displayed by the previous command, enter:

FLush !3 -PATH WanCounter