9

CUSTOMIZING YOUR SOFTWARE

This chapter includes information and procedures to customize your software. This chapter contains the following sections:

Naming Paths and Ports

Using the 56/64 Kbps CSU/DSU Module Autobaud Feature

Working with Dial Number Lists

Using Statistics on the 56/64 Kbps CSU/DSU Port (45x and 55x)

Using Statistics on the T1/FT1 RJ-48 Telco Port (46x and 56x)

Configuring Data Compression

Naming Paths and Ports

To provide a name for your path and port, use:

SETDefault !<path> -PATH NAme = “<string>”

SETDefault !<port> -PORT NAme = “<string>”

For example, to assign the name Floor_1 to path 1 and the name Bldg_1 to port 1, enter:

SETDefault !1 -PATH NAme = "Floor_1"

SETDefault !1 -PORT NAme = "Bldg_1"

Path and Port Naming Restrictions

The following restrictions exist for the -PATH and -PORT NAme parameter:

The name string can contain a maximum of eight characters, the first of which must be alphabetic.

No blank spaces are allowed in the name string. The only non-alphanumeric characters allowed are the asterisk (*), the underscore (_), the period (.), the dash (-), and the at sign (@).

Names must be unique within their type. For example, a path name cannot be the same as an existing path name, but it can be the same as an existing port or virtual port name.

Alphabetic characters are stored and displayed as entered. Names are not case-sensitive when compared on entry with previously entered names. For example, port2 and PORT2 are evaluated as the same name.

Page 111
Image 111
3Com NETBuilder SI manual Customizing Your Software, Naming Paths and Ports, To provide a name for your path and port, use