3Com SuperStack II manual Using Statistics on the T1/FT1 RJ-48 Telco Port 46x, Network Statistics

116CHAPTER 9: CUSTOMIZING YOUR SOFTWARE

Using Statistics on the T1/FT1 RJ-48 Telco Port (46x and 56x)

Network Statistics

The T1/FT1 RJ-48 Telco port reports 24 hour statistics in 15 minute samples. These statistics are cumulative from the last reboot or the last time these statistics were flushed, whichever is later.

To view the network statistics for the CSU/DSU path, use:

SHow !<path> -PATH WanCounters

To view the user statistics for the CSU/DSU interface, use:

SHow !<path> -PATH UserCounters

The displays look similar to the following example:

CUMULATIVE STATISTICS SINCE LAST FLUSHED OR REBOOTED+

ES 00001

SES 00019K

UAS 00005

BES 00010

CSS 00020

LOFC 00010

EFS 00245M

LAST 24 HOURS STATISTICS IN 15 MINUTE SAMPLES

	00:15	00:30	00:45	01:00	01:15	01:30	01:45	02:00	02:00
ES	00000	00000	00000	00000	00000	00000	00000	00000	00000
SES	00000	00000	00000	00000	00000	00000	00000	00000	00000
UAS	00900	00900	00900	00900	00900	00900	00900	00900	00900
BES	00900	00900	00900	00900	00900	00900	00900	00900	00900
CSS	00900	00000	00000	00000	00000	00000	00000	00000	00000
LOFC	00000	00000	00000	00000	00000	00000	00000	00000	00000
EFS	00000	00000	00000	00000	00000	00000	00000	00000	00000
The error definitions are:
ES	The number of errored seconds.
SES	The number of severely errored seconds.
UAS	The number of unavailable seconds.
BES	The number of bursty errored seconds.
CSS	The number of controlled slip errored seconds.
LOFC	Loss of frame count
EFS	The number of error free seconds
BPV	The number of bipolar violations (or code violations).
LOS	The number of “No pulses received at Network Interface”
OOF	The number of “No framing pattern sync at Network Interface”