Polycom 60PP9753, 55PP9753 manual Using Active Control Plus+, Active Control Plus+ Settings

Using Active Control™ Plus+

Active Control™ Plus+ monitors incoming video signals from the Tuner, AV1, AV2, and Side inputs and adjusts key picture settings for best picture quality. In addition to measur- ing picture noise, this feature uses an ambient light sensor (located on the front of the TV) to adjust the picture settings according to viewing conditions in the room. When you choose to turn Active Control™ Plus+ on, you have the options Minimum, Medium, or Maximum. Maximum is the recommended option.

NOTE: Active Control™ Plus is disabled with the AV3 and AV4 input sources.

1 Press the Active Control™ button on the remote control to display the “Active Control” menu.

2 Press the Cursor Up or Down button to select one of the options: “Minimum,” “Medium,” “Maximum,” or “Off.”.

NOTE: The Active Control™ values shown in the information window will based on the current AutoPicture™ set- ting: Personal, Rich, Natural, Soft, Multimedia, or Eco.

3 Press the Active Control button to remove the on-screen menu from the TV screen.

cCHECK IT OUT

Active Control™ Plus+ Settings

Minimum—Sharpness, Dynamic Contrast, and Noise Reduction are controlled auto- matically.

Medium—Sharpness, Color, Dynamic Contrast, and Noise Reduction are con- trolled automatically.

Maximum—Sharpness, Color, Contrast, Dynamic Contrast, and Noise Reduction are controlled automatically.

Active Control	Active	picture	Active	display
Medium
Contrast				63
Dynamic contrast				15
Color				36
Sharpness				52
DNR				20
Motion				04
Tint				44

2

2

1

3

27