Polycom 60PP9753, 55PP9753 manual Manual Convergence, Multipoint, Select the Converge menu

G

Manual Convergence, Multipoint

Sometimes the convergence is only out of alignment in one part of the screen. To cor- rect convergence in a specific part of the screen, use Multipoint Red or Blue.

1	Press the Menu button on the remote
	control to display the on-screen
	menu.
2	Press the Cursor Down button to
	select “Settings.”
3	Press the Cursor Right button to
	select the “Converge” menu.

TV

Settings

Demo

Install

Picture Sound Features Channels

TV

General Clock

Settings

Demo

Install

Converge
Settings
Manual Convergence	- - -
	Multipoint	red
	Multipoint	blue

4	Press the Cursor Down button repeat-
	edly to select “Manual
	Convergence.”
5	Press the Cursor Right button to
	enter the menu. Press the Cursor
	Down button to select Multipoint
	Red or Multipoint Blue (according to
	the color of the fringes) and press
	Cursor Right again to enter the adjust
	mode.
6	Press Cursor Up, Down, Left and
	Right to select the point on the
	screen to adjust.
7	Press mthen Cursor Up, Down,
	Left and Right to converge the small
	Red or Blue cross with the golden
	center cross.
8	Press mto switch to navigate
	mode. Repeat steps 6-8 until the pic-
	ture is converged.
9	Press the Menu button to return to
	the menu and make further adjust-
	ments if needed.

After changing the Multipoint convergence you can Save Multipoint, Undo Multipoint, or restore Factory Settings

10In the Manual Convergence menu, use Cursor Up and Down to select Save Multipoint, Undo Multipoint, or Factory Settings. Press Cursor Right to activate your selection.

11Press the Menu button again to remove the on-screen menu from the TV screen.

6 3

10 5

6

6 10 2

4 1

5 9

6 11 10

7 8

Converge

Settings

- - -

Manual Convergence Factory settings

Save multipoint

Undo multipoint

Factory settings

TO NAVIGATE EXIT: TO ADJUST

TO ADJUST EXIT: TO NAVIGATE

Converge
Settings
Manual Convergence	- -	-
	Save multipoint
	Undo multipoint
	Factory	settings

Converge
Settings
Manual Convergence	- -	-
	Undo multipoint
	Factory	settings

71