HP Guest Management Software manual „ satelliteEntry

MIB descriptions

COLUBRIS-SATELLITE-MANAGEMENT-MIB

„ satelliteEntry

.1.3.6.1.4.1.8744.5.7.1.1.1.1 not-accessible

Information about a Satellite access point currently registered by the Master access point.

satelliteIndex - Uniquely identifies a device in the satellite table.

„satelliteIndex

.1.3.6.1.4.1.8744.5.7.1.1.1.1.1not-accessible

Index of a the satellite in the satelliteTable.

„satelliteDeviceId

.1.3.6.1.4.1.8744.5.7.1.1.1.1.2read-only

Device ID of a the satellite in the satelliteTable.

„satelliteMacAddress

.1.3.6.1.4.1.8744.5.7.1.1.1.1.3read-only

Indicates the MAC address of the wireless radio of the satellite access point.

„satelliteIpAddress

.1.3.6.1.4.1.8744.5.7.1.1.1.1.4read-only

Indicates the IP address of the satellite access point.

„satelliteName

.1.3.6.1.4.1.8744.5.7.1.1.1.1.5read-only

Indicates the name of the satellite access point.

„satelliteSSID

.1.3.6.1.4.1.8744.5.7.1.1.1.1.6read-only

Indicates the SSID of the satellite access point.

„satelliteChannelNumber

.1.3.6.1.4.1.8744.5.7.1.1.1.1.7read-only

Indicates the wireless channel number the satellite access point is operating on.

„satelliteForwardWirelessToWireless

.1.3.6.1.4.1.8744.5.7.1.1.1.1.8read-only

Indicates if the forwarding of traffic between wireless client stations is enabled on the satellite access point.

’true’: indicates that the forwarding feature is enabled.

’false’: indicates that no forwarding takes place.

„satelliteMasterTrafficOnly

.1.3.6.1.4.1.8744.5.7.1.1.1.1.9read-only

Indicates if the satellite will only forward traffic that is addressed to the MAC address of the Master access point.

„satelliteSNMPPort

.1.3.6.1.4.1.8744.5.7.1.1.1.1.10read-only

Indicates the SNMP port on which the satellite listens. The value zero is used when no information could be retrieved from the satellite device.

3-72