HP Guest Management Software HpWlanNeighborhoodNeighborTable, HpWlanNeighborhoodClassifiedApTable

MIB descriptions

HP-WLAN-NEIGHBORHOOD-MIB

hpWlanNeighborhoodNeighborTable

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.4 not-accessible

Statistics for each neighbor access point (AP) detected by a discovered AP’s radio.

„hpWlanNeighborhoodNeighborEntry

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.4.1not-accessible

An entry in the hpWlanNeighborhoodNeighborTable.

„hpWlanNeighborhoodNeighborBaseBssid

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.4.1.1not-accessible

Indicates the Base Basic Service Set Identifier of the neighbor access point as detected by an observing radio.

„hpWlanNeighborhoodNeighborMaskSize

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.4.1.2read-only

Indicates the mask size of a neighbor access point as detected by an observing radio. Set to 0 if unknown.

„hpWlanNeighborhoodNeighborSignalStrength

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.4.1.3read-only

Indicates the signal strength of the neighbor access point as detected by the observing radio.

„hpWlanNeighborhoodNeighborNoiseStrength

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.4.1.4read-only

Indicates the noise level in the channel on which the neighbor access point was detected by the observing radio.

„hpWlanNeighborhoodNeighborPrimaryChannel

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.4.1.5read-only

Indicates the primary wireless operating channel for the neighbor access point as detected by the observing radio.

„hpWlanNeighborhoodNeighborSecondaryChannel

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.4.1.6read-only

Indicates the secondary wireless operating channel for the neighbor access point as detected by the observing radio. Such a secondary channel would be in use by neighbors using channel bonding when to provide service in a 40MHz wide channel.

„hpWlanNeighborhoodNeighborHtCapability

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.4.1.7read-only

Returns true if the neighbor access point is capable of high-throughput 40 Mhz channel use, as detected by the observing radio. Returns false if the neighbor access point is known to be incapable. Otherwise, returns unknown.

„hpWlanNeighborhoodNeighborLastSeenTime

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.4.1.8read-only

Timestamp for the last time an access point was seen by the observing radio.

hpWlanNeighborhoodClassifiedApTable

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.5 not-accessible

Statistics for each classified access point (AP) detected by a discovered AP’s radio.

3-95