HP Guest Management Software manual CoDot11MinimumSNRLevel, CoDot11SNRLevelNotificationEnabled

MIB descriptions

COLUBRIS-802DOT11-MIB

„coDot11FrequencyBandsSupported

.1.3.6.1.4.1.8744.5.4.3.9.1.3 read-only

The capability of the OFDM PHY implementation to operate in the three U-NII bands. Coded as an integer value of a three 1 bit fields as follow:

bit 0 - Capable of operating in the lower (5.15-5.25 GHz) U-NII band.

bit 1 - Capable of operating in the middle (5.25-5.35 GHz) U-NII band.

bit 2 - Capable of operating in the middle (5.725-5.825 GHz) U-NII band.

For example, for an implementation capable of operating in the lower and middle bands, this object would take the value 3.

coDot11MinimumSNRLevel

.1.3.6.1.4.1.8744.5.4.3.10read-write

An SNR level notification is generated when the average SNR level is below this attribute. Not supported on the M111.

coDot11SNRLevelNotificationEnabled

.1.3.6.1.4.1.8744.5.4.3.11read-write

This attribute, when true, enables the generation of SNR level notifications. Not supported on the M111.

coDot11SNRLevelNotificationInterval

.1.3.6.1.4.1.8744.5.4.3.12read-write

Interval in minutes between SNR Level notifications. Not supported on the M111.

coDot11CountryCode

.1.3.6.1.4.1.8744.5.4.3.13read-only

The radios are running accordingly to the regulations of this country.

coDot11PhyHTTable

.1.3.6.1.4.1.8744.5.4.3.14not-accessible

Entry of attributes for coDot11PhyHTEntry. This table only apply when the PHY type is HT.

„ coDot11PhyHTEntry

.1.3.6.1.4.1.8744.5.4.3.14.1	not-accessible
An entry in the coDot11PhyHTEntry Table.

ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.

„coDot11FortyMHzOperationImplemented

.1.3.6.1.4.1.8744.5.4.3.14.1.1 read-only

This attribute, when TRUE, indicates that 40 MHz Operation is implemented.

„coDot11FortyMHzOperationEnabled

.1.3.6.1.4.1.8744.5.4.3.14.1.2 read-only

This attribute, when TRUE, indicates that 40 MHz Operation is enabled.

„coDot11CurrentPrimaryChannel

.1.3.6.1.4.1.8744.5.4.3.14.1.3 read-only

This attribute indicates the operating channel. If 20/40 MHz Mode is currently in use then this attribute indicates the primary channel.

3-125