MIB descriptions

COLUBRIS-USER-SESSION-MIB

„coUserSessIndex

.1.3.6.1.4.1.8744.5.36.1.2.1.1.1not-accessible

Index of a user in the coUserSessionTable.

„coUserSessUserName

.1.3.6.1.4.1.8744.5.36.1.2.1.1.2read-only

Indicates the user’s name.

„coUserSessClientIpAddress

.1.3.6.1.4.1.8744.5.36.1.2.1.1.3read-only

Indicates the user’s IP address.

„coUserSessSessionDuration

.1.3.6.1.4.1.8744.5.36.1.2.1.1.4read-only

Indicates how long the user’s session has been active. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.

„coUserSessIdleTime

.1.3.6.1.4.1.8744.5.36.1.2.1.1.5read-only

Indicates for how long the user’s session has been idle. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.

„coUserSessMAPGroupName

.1.3.6.1.4.1.8744.5.36.1.2.1.1.6read-only

Indicates the user’s MultiService Access Point Group Name.

„coUserSessVSCName

.1.3.6.1.4.1.8744.5.36.1.2.1.1.7read-only

Indicates the user’s Virtual Service Community Name.

„coUserSessSSID

.1.3.6.1.4.1.8744.5.36.1.2.1.1.8read-only

Indicates the user’s Access Point SSID (ONLY when Location-aware is enabled and properly configured). If this information is not available, a zero-Length string is returned.

„coUserSessVLAN

.1.3.6.1.4.1.8744.5.36.1.2.1.1.9read-only

For access-controlled users, this value indicates the downstream VLAN currently assigned to the user.

For non-access-controlled users, it indicates the user VLAN.

„coUserSessPHYType

.1.3.6.1.4.1.8744.5.36.1.2.1.1.10read-only

Specifies the user’s radio type.

„coUserSessAuthType

.1.3.6.1.4.1.8744.5.36.1.2.1.1.11read-only

User’s authentication type.

„coUserSessCalledStationID

.1.3.6.1.4.1.8744.5.36.1.2.1.1.12read-only

Indicates the user’s called station ID.

3-82