MIB descriptions

COLUBRIS-SYSTEM-MIB

systemConfigurationVersion

.1.3.6.1.4.1.8744.5.6.1.1.6read-write

User-defined string to identify the current device configuration. This string could be anything in printable ASCII characters.

systemUpTime

.1.3.6.1.4.1.8744.5.6.1.1.7read-only

How long the system has been running since its last restart. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.

systemMacAddress

.1.3.6.1.4.1.8744.5.6.1.1.8accessible-for-notify

MAC address of the device. This information is only returned in a systemHeartbeatNotification event.

systemWanPortIpAddress

.1.3.6.1.4.1.8744.5.6.1.1.9accessible-for-notify

IP address of the device WAN port. This information is only returned in a systemHeartbeatNotification event.

systemProductFlavor

.1.3.6.1.4.1.8744.5.6.1.1.10read-only

The product flavor can extend or alter the functionality of a HP product.

systemDeviceIdentification

.1.3.6.1.4.1.8744.5.6.1.1.11read-only

Manufacturing Ethernet base MAC address.

systemFirmwareBuildDate

.1.3.6.1.4.1.8744.5.6.1.1.12read-only

Build date of the device firmware in the format YYYY/MM/DD.

systemControllerMode

.1.3.6.1.4.1.8744.5.6.1.1.13read-only

Indicates the current controller mode.

systemCDPOperState

.1.3.6.1.4.1.8744.5.6.1.1.14read-only

When True indicates that CDP support is enabled.

systemLLDPOperState

.1.3.6.1.4.1.8744.5.6.1.1.15read-only

When True indicates that the LLDP agent is started.

systemTimeUpdateMode

.1.3.6.1.4.1.8744.5.6.1.2.1read-write

Specifies the method and format used to set the system time.

’manual’: Operator must configures the system time parameters manually in the GMT zone.

’sntpUdp’: Look for time servers in the systemTimeServerTable in order to synchronize the device system time using SNTP.

3-131