MIB descriptions

HP-WLAN-NEIGHBORHOOD-MIB

hpWlanNeighborhoodRrmEnabledRadiosNumber

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.2 read-only

Indicates the number of enabled radios managed by the Radio Resource Management system.

hpWlanNeighborhoodRrmConfigChangedRadiosNumber

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.3 read-only

Indicates the number of radios managed by the Radio Resource Management system for which there is a difference between the current and planned configuration (transmitting power and/or operating channel).

hpWlanNeighborhoodRrmDfsChannelChangedRadiosNumber

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.4 read-only

Indicates the number of radios managed by the Radio Resource Management system which detected a radar signal and performed a channel change for DFS reasons.

hpWlanNeighborhoodRrmNewRadiosNumber

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.5 read-only

Indicates the number of radios managed by the Radio Resource Management (RRM) system which are new since the last RRM analysis was run.

hpWlanNeighborhoodRrmDisabledRadiosNumber

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.6 read-only

Indicates the number of radios managed by the Radio Resource Management (RRM) system which have been disabled since the last RRM analysis was run.

hpWlanNeighborhoodRrmMissingNeighborRadiosNumber

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.7 read-only

Indicates the number of non-controlled neighbor radios managed by the Radio Resource Management system which are missing from the current network map in comparison to the last applied persistent baseline network map.

hpWlanNeighborhoodRrmNewNeighborRadiosNumber

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.1.8 read-only

Indicates the number of non-controlled neighbor radios managed by the Radio Resource Management system which are new to the current network map in comparison to the last applied persistent baseline network map.

hpWlanNeighborhoodControlledApTable

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2 not-accessible

Statistics for each controlled access point discovered by a controller.

„hpWlanNeighborhoodControlledApEntry

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2.1not-accessible

An entry in the hpWlanNeighborhoodControlledApTable.

„hpWlanNeighborhoodControlledApRadiosScanningNumber

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2.1.1read-only

Indicates the number of radios within a controlled access point which are scanning as part of the Intrusion Detection System.

3-93