![](/images/backgrounds/286057/hp-procurve-guest-management-software-reference-guide-669811147x1.png)
MIB descriptions
coDot11CurrentRxAntenna
.1.3.6.1.4.1.8744.5.4.3.2.1.3 |
The current antenna being used to receive, if the coDot11 DiversitySupport indicates that diversity is not supported. The selected antenna shall be one of the antennae marked for receive in the coDot11AntennasListTable.
coDot11PhyConfigTable
.1.3.6.1.4.1.8744.5.4.3.3not-accessible
PHY configuration attributes. In tabular form to allow multiple instances on an agent.
coDot11PhyConfigEntry
.1.3.6.1.4.1.8744.5.4.3.3.1 |
An entry in the coDot11PhyConfig Table.
ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
coDot11PhyAdminStatus
.1.3.6.1.4.1.8744.5.4.3.3.1.1 |
The desired state of the radio interface.
’up’: Sets the radio interface to be ready to transmit and receive.
’down’: Stops the transmission and reception of packets on the interface.
coDot11PhyOperStatus
.1.3.6.1.4.1.8744.5.4.3.3.1.2 |
The current state of the radio interface.
’up’: The radio interface is ready to ready to transmit and receive.
’down’: The radio is not able to transmit or receive on the interface.
coDot11PhyDSSSTable
.1.3.6.1.4.1.8744.5.4.3.4not-accessible
Entry of attributes for coDot11PhyDSSSEntry. In tabular form to allow multiple instances on an agent. This table only apply when in DSSS 2.4 GHz range
coDot11PhyDSSSEntry
.1.3.6.1.4.1.8744.5.4.3.4.1 |
An entry in the coDot11PhyDSSSEntry Table.
ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
coDot11CurrentChannel
.1.3.6.1.4.1.8744.5.4.3.4.1.1 |
The desired operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in 15.4.6.2.
coDot11CCAModeSupported
.1.3.6.1.4.1.8744.5.4.3.4.1.2read-only
coDot11CCAModeSupported is a
energy detect only (ED_ONLY) = 01 carrier sense only (CS_ONLY) = 02