MIB descriptions

HP-WLAN-NEIGHBORHOOD-MIB

„hpWlanNeighborhoodControlledApTotalRadiosNumber

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2.1.2read-only

Indicates the total number of radios within a controlled access point.

„hpWlanNeighborhoodControlledApAverageDetectionTime

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2.1.3read-only

Indicates the average time (in seconds) it takes the radios of a controlled access point to detect a rogue access point.

„hpWlanNeighborhoodControlledApMaximumDetectionTime

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.2.1.4read-only

Indicates the maximum time (in seconds) it takes the radios of a controlled access point to detect a rogue access point.

hpWlanNeighborhoodRadioMapTable

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3 not-accessible

Statistics for each radio that has been discovered by the controller.

„hpWlanNeighborhoodRadioMapEntry

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1not-accessible

An entry in the hpWlanNeighborhood.

„hpWlanNeighborhoodRadioMapBaseBssid

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.1read-only

Indicates theBase Basic Service Set Identifier assigned to the radio.

„hpWlanNeighborhoodRadioMapBand

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.2read-only

Indicates the wireless operating band for the radio (e.g. 2.4Ghz, 5Ghz).

„hpWlanNeighborhoodRadioMapPrimaryChannel

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.3read-only

Indicates the primary channel used by the radio.

„hpWlanNeighborhoodRadioMapSecondaryChannel

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.4read-only

Indicates the secondary channel used by the radio for channel bonding when providing service in a 40MHz wide channel.

„hpWlanNeighborhoodRadioMapTrafficShapingMode

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.5read-write

Sets the mode in which the radio’s traffic shaping feature is set to operate.

„hpWlanNeighborhoodRadioMapLastActiveTime

.1.3.6.1.4.1.11.2.14.11.6.4.3.1.2.3.1.6read-only

Timestamp for the most recent date and time that a radio was known to be active in the RF environment. This corresponds to the date and time that a beacon frame was transmitted by a controlled access point, or to the date and time a beacon from the radio was received by a controlled access point.

3-94

Page 120
Image 120
HP Guest Management Software manual HpWlanNeighborhoodRadioMapTable, „ hpWlanNeighborhoodControlledApTotalRadiosNumber