Colubris-Device-Wireless-Mib

MIB descriptions

COLUBRIS-DEVICE-WIRELESS-MIB

coDev1xStaEapolRxFrame

.1.3.6.1.4.1.8744.5.32.1.3.1.1.1read-only

The number of valid EAPOL frames of any type that have been received by this

Authenticator.

coDev1xStaEapolTxFrame

.1.3.6.1.4.1.8744.5.32.1.3.1.1.2read-only

The number of EAPOL frames of any type that have been transmitted by this

Authenticator.

coDev1xStaBackendResponses

.1.3.6.1.4.1.8744.5.32.1.3.1.1.3read-only

Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server.

coDev1xStaBackendChallenges

.1.3.6.1.4.1.8744.5.32.1.3.1.1.4read-only

Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator.

coDev1xStaBackendAuthSuccesses

.1.3.6.1.4.1.8744.5.32.1.3.1.1.5read-only

Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server.

coDev1xStaBackendAuthFails

.1.3.6.1.4.1.8744.5.32.1.3.1.1.6read-only

Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server.

This MIB is used to view the status and statistics of each wireless interface, Virtual Service Community (VSC), wireless client, and detected access point, available on each of the access points managed by a controller.