![](/images/backgrounds/286057/hp-procurve-guest-management-software-reference-guide-66981164x1.png)
MIB descriptions
publicAccessUserBytesReceived
.1.3.6.1.4.1.8744.5.1.1.3.6.1.11read-only
Indicates the total number of bytes received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
publicAccessUserPacketsSent
.1.3.6.1.4.1.8744.5.1.1.3.6.1.12read-only
Indicates the total number of IP packets sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
publicAccessUserPacketsReceived
.1.3.6.1.4.1.8744.5.1.1.3.6.1.13read-only
Indicates the total number of IP packets received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
publicAccessUserForceDisconnection
.1.3.6.1.4.1.8744.5.1.1.3.6.1.14read-write
Setting this attribute to ’adminReset’ disconnects the user with a cause of
ADMIN_RESET. Reading this variable always return ’idle’.
publicAccessUserStationMacAddress
.1.3.6.1.4.1.8744.5.1.1.3.6.1.15read-only
Indicates the user’s MAC Address.
publicAccessUserApMacAddress
.1.3.6.1.4.1.8744.5.1.1.3.6.1.16read-only
Indicates the user’s Access Point MAC Address when Location- Aware is enabled or the
Access Controller MAC Address.
publicAccessUserGroupName
.1.3.6.1.4.1.8744.5.1.1.3.6.1.17read-only
Indicates the user’s Access Point Group Name (ONLY when
publicAccessUserSSID
.1.3.6.1.4.1.8744.5.1.1.3.6.1.18read-only
Indicates the user’s Access Point SSID (ONLY when
publicAccessUserSecurity
.1.3.6.1.4.1.8744.5.1.1.3.6.1.19read-only
Specifies the user’s security mode.
publicAccessUserPHYType
.1.3.6.1.4.1.8744.5.1.1.3.6.1.20read-only
Specifies the user’s radio type.
publicAccessUserVLAN
.1.3.6.1.4.1.8744.5.1.1.3.6.1.21read-only
Specifies the VLAN currently assigned to the user.