MIB descriptions

COLUBRIS-WDS-MIB

„coWDSLinkSignal

.1.3.6.1.4.1.8744.5.33.1.4.1.1.16read-only

Strength of the wireless signal.

„coWDSLinkNoise

.1.3.6.1.4.1.8744.5.33.1.4.1.1.17read-only

Level of local background noise.

coWDSNetworkScanTable

.1.3.6.1.4.1.8744.5.33.1.5.1not-accessible

Conceptual table for local mesh network scans.

„coWDSNetworkScanEntry

.1.3.6.1.4.1.8744.5.33.1.5.1.1

not-accessible

An Entry (conceptual row) in the WDS Network Scan Table. coWDSScanRadioIndex - Radio number where the local mesh peer was detected.

coWDSScanPeerIndex - Uniquely identify a local mesh peer on a radio inside the local mesh network scan table.

„coWDSScanRadioIndex

.1.3.6.1.4.1.8744.5.33.1.5.1.1.1not-accessible

Radio number on which the local mesh peer was detected.

„coWDSScanPeerIndex

.1.3.6.1.4.1.8744.5.33.1.5.1.1.2not-accessible

Uniquely identify a local mesh peer on a radio.

„coWDSScanGroupId

.1.3.6.1.4.1.8744.5.33.1.5.1.1.3read-only

Mesh ID used by the local mesh peer.

„coWDSScanPeerMacAddress

.1.3.6.1.4.1.8744.5.33.1.5.1.1.4read-only

MAC address of the local mesh peer.

„coWDSScanChannel

.1.3.6.1.4.1.8744.5.33.1.5.1.1.5read-only

Channel on which the local mesh peer is transmitting.

„coWDSScanSNR

.1.3.6.1.4.1.8744.5.33.1.5.1.1.6read-only

Signal noise ratio of the local mesh peer.

„coWDSScanMode

.1.3.6.1.4.1.8744.5.33.1.5.1.1.7read-only

Current mode of the local mesh peer.

„coWDSScanAvailable

.1.3.6.1.4.1.8744.5.33.1.5.1.1.8read-only

Peer is accepting connections.

3-33