MIB descriptions

COLUBRIS-802DOT11-MIB

carrier sense and energy detect (ED_and_CS)= 04 Or the logical sum of any of these values.

„coDot11CurrentCCAMode

.1.3.6.1.4.1.8744.5.4.3.4.1.3

read-only

The current CCA method in operation. Valid values are: energy detect only (edonly) = 01

carrier sense only (csonly) = 02

carrier sense and energy detect (edandcs)= 04

coDot11RegDomainsSupportedTable

.1.3.6.1.4.1.8744.5.4.3.5not-accessible

There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support in this implementation. Currently defined values and their corresponding Regulatory Domains are:

FCC (USA) = X’10’

DOC (Canada) = X’20’

ETSI (most of Europe) = X’30’

Spain = X’31’

France = X’32’

Japan = X’41’

„coDot11RegDomainsSupportedEntry

.1.3.6.1.4.1.8744.5.4.3.5.1

not-accessible

An entry in the coDot11RegDomainsSupported Table.

ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.

coDot11RegDomainsSupportIndex - Uniquely specifies the regulatory domain in the table.

„coDot11RegDomainsSupportIndex

.1.3.6.1.4.1.8744.5.4.3.5.1.1

not-accessible

The auxiliary variable used to identify instances of the columnar objects in the

RegDomainsSupported Table.

„coDot11RegDomainsSupportValue

.1.3.6.1.4.1.8744.5.4.3.5.1.2

read-only

There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support in this implementation. Currently defined values and their corresponding Regulatory Domains are:

FCC (USA) = X’10’

DOC (Canada) = X’20’

ETSI (most of Europe) = X’30’

Spain = X’31’

France = X’32’

Japan = X’41’

3-122