MIB descriptions

COLUBRIS-QOS-MIB

„coQOSQueueId

.1.3.6.1.4.1.8744.5.13.1.1.1.1.1not-accessible

Queue identifier used to access the statistics.

„coQOSTransmittedFrameCount

.1.3.6.1.4.1.8744.5.13.1.1.1.1.2read-only

This counter increments only when an acknowledged MPDU with an individual address in address 1 field, or MPDU with a multicast address in the address 1 field of type Data or Management is transmitted.

„coQOSMulticastTransmittedFrameCount

.1.3.6.1.4.1.8744.5.13.1.1.1.1.3read-only

This counter increments only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in an ESS, where these frames are directed to the AP, this implies having received an acknowledgment to all associated MPDUs.

„coQOSFailedCount

.1.3.6.1.4.1.8744.5.13.1.1.1.1.4read-only

This counter increments when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the coQOSShortRetryLimit or coQOSLongRetryLimit.

„coQOSRetryCount

.1.3.6.1.4.1.8744.5.13.1.1.1.1.5read-only

This counter increments when an MSDU is successfully transmitted after one or more retransmissions. This is basically a total of single and multiple retry counts.

„coQOSMultipleRetryCount

.1.3.6.1.4.1.8744.5.13.1.1.1.1.6read-only

This counter increments when an MSDU is successfully transmitted after more than one retransmission.

„coQOSFrameDuplicateCount

.1.3.6.1.4.1.8744.5.13.1.1.1.1.7read-only

This counter increments when a frame is received that the Sequence Control field indicates is a duplicate.

„coQOSReceivedFrameCount

.1.3.6.1.4.1.8744.5.13.1.1.1.1.8read-only

This counter shall be incremented for each successfully received MPDU of type Data or Management. This is basically a total of unicast and multicast received frames.

„coQOSMulticastReceivedFrameCount

.1.3.6.1.4.1.8744.5.13.1.1.1.1.9read-only

This counter incremenst when an MPDU is received with the multicast bit set in the destination MAC address.

3-55