MIB descriptions

COLUBRIS-802DOT11-MIB

„ coDot11DetStaRate

.1.3.6.1.4.1.8744.5.4.1.17.1.7

read-only

Receive rate of the last probe request received from this client.

„ coDot11DetStaSSID

.1.3.6.1.4.1.8744.5.4.1.17.1.8

read-only

SSID contained in the last probe request received from this client.

„coDot11DetStaTimeDiscovered

.1.3.6.1.4.1.8744.5.4.1.17.1.9

read-only

Elapsed time in seconds since the first probe has been received from this client.

„coDot11DetStaTimeLastSeen

.1.3.6.1.4.1.8744.5.4.1.17.1.10read-only

Elapsed time in seconds since the last probe has been received from this client.

coDot11OperationTable

.1.3.6.1.4.1.8744.5.4.2.1not-accessible

Group contains MAC attributes pertaining to the operation of the MAC. In tabular form to allow multiple instances on an agent.

„coDot11OperationEntry

.1.3.6.1.4.1.8744.5.4.2.1.1

not-accessible

An entry in the coDot11OperationEntry Table.

ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.

„

coDot11MACAddress

 

 

.1.3.6.1.4.1.8744.5.4.2.1.1.1

read-only

 

Unique MAC Address assigned to the STA.

 

„

coDot11RTSThreshold

 

 

.1.3.6.1.4.1.8744.5.4.2.1.1.2

read-write

Specifies the number of octets in an MPDU, below which an RTS/CTS handshake is not performed. An RTS/CTS handshake is performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size has the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. The default value of this attribute is 2347.

„coDot11ShortRetryLimit

.1.3.6.1.4.1.8744.5.4.2.1.1.3

read-only

Indicates the maximum number of transmission attempts of a frame, the length of which is less than or equal to coDot11RTSThreshold, that are made before a failure condition is indicated. The default value of this attribute is 7.

3-115