MIB descriptions

COLUBRIS-DEVICE-WIRELESS-MIB

„coDevWirCliStaNoiseLevel

.1.3.6.1.4.1.8744.5.25.1.7.1.1.6read-only

Level of local background noise.

„coDevWirCliStaSNR

.1.3.6.1.4.1.8744.5.25.1.7.1.1.7read-only

Relative strength of the signal level compared to the noise level.

„coDevWirCliStaVLAN

.1.3.6.1.4.1.8744.5.25.1.7.1.1.8read-only

VLAN ID of the associated station.

„coDevWirCliStaTransmitRate

.1.3.6.1.4.1.8744.5.25.1.7.1.1.9read-only

Current transmit rate of a associated station.

„coDevWirCliStaReceiveRate

.1.3.6.1.4.1.8744.5.25.1.7.1.1.10read-only

Current receive rate of a associated station.

„coDevWirCliStaTrafficAuthorized

.1.3.6.1.4.1.8744.5.25.1.7.1.1.11read-only

Current receive rate of the associated station.

„coDevWirCliSta8021xAuthenticated

.1.3.6.1.4.1.8744.5.25.1.7.1.1.12read-only

Current receive rate of the associated station.

„coDevWirCliStaMACAuthenticated

.1.3.6.1.4.1.8744.5.25.1.7.1.1.13read-only

Current receive rate of the associated station.

„coDevWirCliStaMACFiltered

.1.3.6.1.4.1.8744.5.25.1.7.1.1.14read-only

Current receive rate of the associated station.

„coDevWirCliStaPhyType

.1.3.6.1.4.1.8744.5.25.1.7.1.1.15read-only

Indicates the wireless mode used by the associated station.

„coDevWirCliStaWPAType

.1.3.6.1.4.1.8744.5.25.1.7.1.1.16read-only

Indicates the WPA/Encryption type used by the wireless station.

„coDevWirCliStaIpAddress

.1.3.6.1.4.1.8744.5.25.1.7.1.1.17read-only

Indicates the IP address of the wireless station.

„coDevWirCliStaPowerSavingMode

.1.3.6.1.4.1.8744.5.25.1.7.1.1.18read-only

If true, indicates that the wireless station is in power save mode.

3-15

Page 41
Image 41
HP Guest Management Software manual „ coDevWirCliStaNoiseLevel, Level of local background noise „ coDevWirCliStaSNR