HP Guest Management Software Hp-Wlan-Sflow-Extensions-Mib, COLUBRIS-CONNECTION-LIMITING-MIB OIDs

MIB descriptions

HP-WLAN-SFLOW-EXTENSIONS-MIB

COLUBRIS-CONNECTION-LIMITING-MIB OIDs

connectionLimitingMaximumUserConnections

.1.3.6.1.4.1.8744.5.18.1.1.1read-write

Specifies the maximum number of simultaneous connections allowed for a specific user. If this amount of connections is reached, no other connections will be allowed for user and a trap is generated.

connectionLimitingNotificationEnabled

.1.3.6.1.4.1.8744.5.18.1.1.2read-write

Specifies if connectionLimitingMaximumUserConnectionsReached notifications are generated.

connectionLimitingMaximumSystemConnections

.1.3.6.1.4.1.8744.5.18.1.2.1read-only

Indicates the maximum number of simultaneous connections that are supported by the device. This is calculated based on the device type and available memory.

connectionLimitingUserMACAddress

.1.3.6.1.4.1.8744.5.18.1.2.2accessible-for-notify

Specifies the MAC address of the user that has reached the maximum number of connections.

connectionLimitingUserIPAddress

.1.3.6.1.4.1.8744.5.18.1.2.3accessible-for-notify

Specifies the IP address of the user that has reached the maximum number of connections.

COLUBRIS-CONNECTION-LIMITING-MIB Traps

connectionLimitingMaximumUserConnectionsReached

.1.3.6.1.4.1.8744.5.18.2.0.1

Sent when a user has reached their maximum number of connections.

Parameters: connectionLimitingMaximumUserConnections,connectionLimitingUserMACAdd ress,connectionLimitingUserIPAddress.

HP-WLAN-SFLOW-EXTENSIONS-MIB

This MIB module contains the definitions of Managed Objects for HP ProCurve extensions to sFlow.

HP-WLAN-SFLOW-EXTENSIONS-MIB OIDs

hpWlanSFlowRcvrTable

.1.3.6.1.4.1.11.2.14.11.6.4.2.1.4not-accessible

This table supplements the sFlow receivers table.

„hpWlanSFlowRcvrEntry

.1.3.6.1.4.1.11.2.14.11.6.4.2.1.4.1not-accessible

Attributes of an sFlow Receiver.

3-88