HP Guest Management Software manual SatelliteNumber, SatelliteUpNotificationEnabled

MIB descriptions

COLUBRIS-SATELLITE-MANAGEMENT-MIB

„satelliteSecureWebPort

.1.3.6.1.4.1.8744.5.7.1.1.1.1.11read-only

Indicates the secure web port on which the satellite listens. The value zero is used when no information could be retrieved from the satellite device.

„satelliteDeviceMacAddress

.1.3.6.1.4.1.8744.5.7.1.1.1.1.12read-only

Indicates the MAC address of the satellite access point bridge interface.

„satelliteProductName

.1.3.6.1.4.1.8744.5.7.1.1.1.1.13read-only

Indicates the product name for the device in printable ASCII characters.

„satelliteFirmwareRevision

.1.3.6.1.4.1.8744.5.7.1.1.1.1.14read-only

Indicates the revision number of the device firmware in printable ASCII characters.

„satelliteGroupName

.1.3.6.1.4.1.8744.5.7.1.1.1.1.15read-only

Indicates the location-aware group name of the satellite. The group name is only returned when location-aware is enabled at the satellite. An empty string is returned otherwise.

„satelliteChannelNumberRadio2

.1.3.6.1.4.1.8744.5.7.1.1.1.1.16read-only

Indicates the wireless channel number the radio 2 is operating on.

„satelliteVLAN

.1.3.6.1.4.1.8744.5.7.1.1.1.1.17read-only

Management VLAN.

„satelliteDetectionPort

.1.3.6.1.4.1.8744.5.7.1.1.1.1.18read-only

The detection packet is send on this interface.

satelliteNumber

.1.3.6.1.4.1.8744.5.7.1.1.2read-only

Indicates the number of satellites present in the satellite table.

satelliteUpNotificationEnabled

.1.3.6.1.4.1.8744.5.7.1.2.1read-write

Specifies if satelliteUpNotification notifications are generated.

satelliteDownNotificationEnabled

.1.3.6.1.4.1.8744.5.7.1.2.2read-write

Specifies if satelliteDownNotification notifications are generated.

3-73