HP Guest Management Software manual „ publicAccessUserEntry, „ publicAccessUserIndex

MIB descriptions

COLUBRIS-PUBLIC-ACCESS-MIB

„publicAccessUserEntry

.1.3.6.1.4.1.8744.5.1.1.3.6.1 not-accessible

Information about a particular user that has been authenticated by the authentication system. publicAccessUserIndex - Uniquely identifies a user in the table.

„publicAccessUserIndex

.1.3.6.1.4.1.8744.5.1.1.3.6.1.1not-accessible

Index of a user in the publicAccessUserTable.

„publicAccessUserAuthenType

.1.3.6.1.4.1.8744.5.1.1.3.6.1.2read-only

Indicates the mechanism used to authenticate the user.

„publicAccessUserAuthenMode

.1.3.6.1.4.1.8744.5.1.1.3.6.1.3read-only

Specifies how user authentication is performed. It can be done using a local user list defined on the device or AAA server profile. If both modes are active the local user list is checked first.

„publicAccessUserState

.1.3.6.1.4.1.8744.5.1.1.3.6.1.4read-only

Indicates the current state of the user.

„publicAccessUserStationIpAddress

.1.3.6.1.4.1.8744.5.1.1.3.6.1.5read-only

Indicates the user’s IP address.

„publicAccessUserName

.1.3.6.1.4.1.8744.5.1.1.3.6.1.6read-only

Indicates the user’s name.

„publicAccessUserSessionStartTime

.1.3.6.1.4.1.8744.5.1.1.3.6.1.7read-only

Indicates when this user session was started.

„publicAccessUserSessionDuration

.1.3.6.1.4.1.8744.5.1.1.3.6.1.8read-only

Indicates how long the user’s session has been active. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.

„publicAccessUserIdleTime

.1.3.6.1.4.1.8744.5.1.1.3.6.1.9read-only

Indicates for how long the user’s session has been idle. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.

„publicAccessUserBytesSent

.1.3.6.1.4.1.8744.5.1.1.3.6.1.10read-only

Indicates the total number of bytes sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.

3-37