System Status
Use System Status to view system connections and to conduct a unit
The following screens are displayed in turn when you press the VIEW button when using System Status:
•Self Test
•Accessory Test
•GPS Diagnostic View.
Exit System Status by powering your 900 Series™ off.
Self Test
Self Test displays results from the internal diagnostic self test, including unit serial number, Printed Circuit Board (PCB) serial number, software revision, total hours of operation and the input voltage.
Self Test Screen
Accessory Test
Accessory Test lists the accessories connected to the system.
Accessory Test Screen
NOTE: The speed accessory will be detected only if the paddlewheel has moved since your 900 Series™ was powered up.
43